Saturday, 10 November 2012

FLASH SAMSUNG GALAXY Y S5360- USING ODIN (INDIAN FIRMWARE)

  Steps to flash SAMSUNG GALAXY Y S5360

1. Download the Odin  package on your Computer from the link given at the bottom.
2. After you Install it Extract the package on your computer and OPEN the folder.
3. After that shut down your phone and put it on  DOWNLOAD MODE.

  • (Press the VOLUME DOWN + HOME + POWER BUTTONS simultaneously)
4. Connect your Android Phone to your PC using USB cable and Open Odin.
5. And u will see a yellow box on the left side it means your phone is connected with the PC.
6. Now click PIT and select S5360_totoro_0623.pit
7. Click BOOTLOADER and select BOOT_S5360DDLC2_REV05.tar.md5
8. Click PDA and select PDA_S5360DDLC2_REV05.tar.md5
9. Click PHONE and select MODEM_S5360DDLC2_REV05.tar.md5
10. Click CSC and select GT-S5360-MULTI-CSC-ODDLA2.tar.md5
11. Now check if everything is done and press START ..
12. Wait for the flashing to finish .
13. Do not unplug the USB cable or switch off the phone, otherwise it might brick your phone.
14. Wait until it shows PASS in the left side of the odin in green color, and your phone reboots.

AND NOW..!! CONGRATSS!! YOU HAVE A NEW PHONE..!!

                                    SCREENSHOTS




DOWNLOAD: LINK

3 comments:

  1. its working ... gr8 work dude..

    ReplyDelete
  2. Great! My daughter's phone is not a brick anymore...

    ReplyDelete
  3. thank Uuuuuuuuuuuuuu sooooooooo muchhhhhhhhh

    ReplyDelete